For the electronic cabinet, the high-quality processing technology can well avoid the occurrence of failure, and improper processing will cause the failure of electronic components in the process of later use. Therefore, when we install the electronic cabinet, the application of the isolation system is very important. Generally, when the electronic cabinet is in the working state, there will certainly be a certain degree of vibration, especially the installation With high-speed rail locomotives, aerospace vehicles, ships and other moving cabinets, the cabinet vibration will cause damage to the electronic equipment inside the cabinet. The installation of vibration reduction, noise reduction and vibration isolation system will reduce the incidence of damage to a certain extent. For the damage caused by this phenomenon, a complete set of damping and damping system and inspection measures shall be arranged in advance to detect the problem to meet the working requirements of the electronic cabinet.

The application principle of the damping and vibration isolation system is as follows, which is equivalent to the function of a shock absorber.

 In this way, the internal resonance of the electronic cabinet can be amplified. Because of the short time, the transmission rate is relatively low, so it will not have too much impact on the electronic cabinet. The damping and vibration isolation treatment of the electronic machine tool includes the outer frame, the outer frame bottom plate, the outer frame top plate, the inner frame Inner frame bottom plate and inner frame top plate. The damping components from bottom to top successively include damping bottom plate, lower high-density damping rubber fixing plate, lower high-density damping rubber layer, medium high-density damping rubber fixing plate, upper high-density damping rubber layer, upper high-density damping rubber fixing plate and damping damping damping damping top plate. A pair of opposite sides of damping rubber fixing plate are respectively provided with damping pads, and the thickness of pads and lower resistance The distance between the lower surface of the Ni glue fixing plate and the upper surface of the upper damping glue fixing plate is suitable, and the length of the damping base plate and the damping top plate is suitable for the distance between the two first cushion blocks.